spec no: dsaa5607 rev no: v.6 date: mar/18/2005 page: 1 of 4 approved: j. lu checked: allen liu drawn: s.h.chen 2.1x0.6mm right angle surface led lamp features o 2.1mmx0.6mm right angle smt led, 1.0mm thickness. o low power consumption. o wide viewing angle. o ideal for backlight and indicator. o various colors and lens types available. o package: 2000pcs / reel. o rohs compliant. package dimensions notes: 1. all dimensions are in millimeters (inches). 2.tolerance is 0 .1(0.004") unless otherwise noted. 3.specifications are subject to change without notice. kpa - 2106surck hyper red description the hyper red source color devices are made with dh ingaalp on gaas substrate light emitting diode.
spec no: dsaa5607 rev no: v.6 date: mar/18/2005 page: 2 of 4 approved: j. lu checked: allen liu drawn: s.h.chen selection guid e part no. dice lens type iv (mcd) @ 20ma viewing angle min. typ. 2 1/2 kpa - 2106surck hyper red (ingaalp) water clear 50 150 120 note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. electrical / optical characteristics at t a =25 c symbol parameter device typ. max. units test conditions peak peak wavelength hyper red 650 nm i f =20ma d dominant wavelength hyper red 635 nm i f =20ma ? 1/2 spectral line half - width hyper red 28 nm i f =20ma c capacitance hyper red 35 pf v f =0v;f=1mhz v f forward voltage hyper red 1.95 2.5 v i f =20ma i r reverse current hyper red 10 ua v r = 5v note: 1. 1/10 duty cycle, 0.1ms pulse width. parameter hyper red units power dissipation 170 mw dc forward current 30 ma peak forward current [1] 185 ma reverse voltage 5 v operating / storage temperature - 40c to +85c absolute maximum ratings at t a =25 c
spec no: dsaa5607 rev no: v.6 date: mar/18/2005 page: 3 of 4 approved: j. lu checked: allen liu drawn: s.h.chen hyper red kpa - 2106surck
spec no: dsaa5607 rev no: v.6 date: mar/18/2005 page: 4 of 4 approved: j. lu checked: allen liu drawn: s.h.chen kpa - 2106surck recommended soldering pattern (units : mm ) tape specifications (units : mm ) remarks: if special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. wavelength: +/ - 1nm 2. luminous intensity: +/ - 15% 3. forward voltage: +/ - 0.1v note: accuracy may depend on the sorting parameters.
|
